RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 21 / 284

3. If the Portable Charging Cordset (EVSE) is ready to
charge, ensure the vehicle is in PARK, and then con-
nect the charge connector to the vehicle’s charge
inlet. You will hear a “click” when the charge con-
nector is inserted correctly and coupled with the
vehicle’s charge inlet.
4. When the vehicle commences charging, the Charge
Active indicator lights on the Portable Charging
Cordset (EVSE) will cycle from left to right, and then
both turn off. This pattern will repeat while the
vehicle is charging. The lights are illuminated at the
rate of approximately one cycle per second.
NOTE:
The vehicle should start charging automatically. If
not, please check the following:
○
Portable Charging Cordset (EVSE) — The Portable
Charging Cordset (EVSE) status indicators illumi-
nate green or red to identify the charging status
page 19.
○
Wall Outlet — Check whether the wall outlet is
functional (no power outage) and/or plug the
Portable Charging Cordset (EVSE) into a different
wall outlet.
○
Charging Schedule — Check whether or not the
charging schedules have been enabled. If
enabled, check that you are within the scheduled
time and day of the week. If a charging schedule
has been enabled in the vehicle, and it is outside
the time and day of the week, you may override
the schedule for this charging event by plugging
in the charge connector, unplugging it, and then
plugging it back into the vehicle charge inlet.
Complete the double plug sequence within
10 seconds for it to override the set schedule.
○
Hood Ajar — Check whether the hood is open.
Charging is disabled while the hood is open, and
will resume when the hood closes.
5. To stop the charging process, disconnect the Por-
table Charging Cordset (EVSE) from the vehicle first,
and then from the wall outlet. To disengage the
vehicle coupler, push the button on the connector.
6. Close the inlet door when a Portable Charging Cord-
set (EVSE) is not connected to the vehicle.
NOTE:
It is good practice to keep the ignition in the OFF posi-
tion while conducting Level 1 charging. This minimizes
any additional vehicle loads the Portable Charging Cord-
set (EVSE) has to support. The additional electrical
loads will extend the high voltage battery charging time.
Troubleshooting Using The Status
Indicator Display
If the vehicle is not charging properly, consult the status
indicator lights.
The
AC Power Indicator
displays the status and safety
of the input power. If this indicator is green, the power
is within acceptable limits to charge the vehicle. If only
the AC Power Indicator is flashing red, then there is a
problem with the AC power at the electrical outlet. If the
AC Power Indicator does not return to green, then the
outlet should be inspected by a qualified electrician to
Cordset Indicator Lights
1 — AC Power Indicator Light
2 — Fault Indicator Light
3 — Charge Active Indicator Lights
Inserting The Charge Connector Into The Vehicle Charge
Inlet
Removing The Charge Connector From The Vehicle Charge
Inlet
GETTING TO KNOW YOUR VEHICLE 19
2