RAM Commercial ProMaster 2024, Руководство пользователя, Страница: 123 / 284

CAUTION!
•
The ParkSense Active Park Assist system is only a
parking aid and it is unable to recognize every
obstacle, including small obstacles. Parking curbs
might be temporarily detected or not detected at
all. Obstacles located above or below the sensors’
field of view will not be detected when they are in
close proximity.
•
The vehicle must be driven slowly when using the
ParkSense Active Park Assist system in order to be
able to stop in time when an obstacle is detected.
It is recommended that the driver looks over his/
her shoulders when using the ParkSense Active
Park Assist system.
EXITING THE PARKING SPACE
NOTE:
The function does not work for exiting a perpendicular
parking space, but only exiting parallel parking spaces.
Activation
To activate this function, push the Active ParkSense
switch once. After selection, the system activates and
warns the driver on the instrument cluster display about
the operations that have to be carried out to perform
the maneuver correctly.
Selection Of The Maneuver Side
Use the direction indicators to choose the direction that
you want to perform the maneuver. Use the right arrow
indicator to perform the maneuver to the right side and
use the left arrow indicator to perform the maneuver to
the left.
During the maneuver, the system instructs the driver to
shift to REVERSE, and operate the turn signal in the
direction you want to exit. Let go of the steering wheel
and use the brake or accelerator pedals as instructed,
while the system handles the steering automatically for
exiting the parking space. If the driver continues to
carry out a voluntary or involuntary action on the steer-
ing wheel during the exit maneuver (touching or holding
the steering wheel to prevent its movement), the
maneuver will be interrupted.
End Of Maneuver
The semi-automatic maneuver ends when the display
shows the message of a completed maneuver. At the
end of the maneuver, the system gives back the vehicle
control to the driver.
LANESENSE — IF EQUIPPED
LANESENSE OPERATION
The LaneSense system is operational at speeds above
37 mph (60 km/h) and below 112 mph (180 km/h).
The LaneSense system uses a forward-facing camera to
detect lane markings and measure vehicle position
within the lane boundaries.
When both lane markings are detected and the driver
drifts out of the lane (no turn signal applied), the Lane-
Sense system provides a haptic warning in the form of
torque applied to the steering wheel, as well as a visual
warning in the instrument cluster display, to prompt the
driver to remain within the lane boundaries.
The driver may manually override the haptic warning by
applying force to the steering wheel at any time.
When only a single lane marking is detected and the
driver drifts across the lane marking (no turn signal
applied), the LaneSense system provides a visual
warning through the instrument cluster display to
prompt the driver to remain within the lane.
When only a single lane marking is detected, a haptic or
a torque warning will not be provided.
Shift To Reverse Then Move Backward
Shift To Drive Then Move Forward
STARTING AND OPERATING 121
4