RADWAG AS X2 Series, Руководство пользователя

Страница: 51 / 132

- 51 -
On completed procedure the parameter screen is displayed, value informing on recorded autotest
number, to be found in <RESULT> field, is increased by <1>. To view particular results press
<RESULTS> field and select the given autotest.
To print a report go to <Details> window and press printer pictogram. The software can store up to 50
reports.
10. ADJUSTMENT
In order to ensure the highest weighing accuracy, it is recommended to periodically introduce a
corrective factor of indications to balance memory, the said factor must be referred to a mass
standard. In other words, balance adjustment shall be performed from time to time.
Adjustment should be carried out:
•
Before the beginning of weighing procedure,
•
If long breaks between following measuring series occur,
•
If temperature inside the balance changes more than: 1°C or 2°C for AS series balances or 2°C
for PS series balances.
Types of adjustment:
•
Internal automatic adjustment
•
Manual internal adjustment
•
Adjustment with an external weight of declared mass which cannot be modified or of any mass,
but not lower than 30% of maximum range.
CAUTION!
In case of verified balances (with an internal automatic adjustment system) only automatic internal
adjustment and manual internal adjustment are available. Remember to carry out the adjustment
process when there is no load on the pan! When the weighing pan is loaded, command
<RANGE
EXCEEDED>
is displayed. In such a case remove the load and restart the the adjustment process. Adjustment
process can be aborted if necessary by pressing button at any time during the process.
10.1. INTERNAL ADJUSTMENT
Internal adjustment is carried out by means of an internal adjustment weight. button, when
pressed, automatically triggers adjustment process. Upon adjustment process completion respective
message, informing about process end and about its status, is displayed.
CAUTION!
Adjustment procedure requires stable environmental conditions (no air drafts or ground vibrations). The
process must be carried out with an empty weighing pan.