RADWAG AS X2 Series, Руководство пользователя

Страница: 105 / 132

- 105 -
with DHCP set to NO value, enter manually IP; MASK; DEFAULT GATE parameters,
with DHCP set to YES value, the balance software automatically reads and displays data
assigned by Wi-Fi router by means of which the balance is to be connected,
•
enter <SCANNING NETWORKS> parameter and start network searching procedure, upon
completion, list of detected networks is displayed along with information on signal strength and
channel number,
•
select network of your choice,
•
password window is displayed, using an on-screen keyboard enter the password,
•
<NETWORK CONFIGURATION> window is displayed, connection procedure starts
automatically,
•
Press button to go one level up, <STATUS> parameter features <CONNECTING> sign
informing on the fact that the balance tries to connent the network,
•
for successfully established connection <CONNECTING> status turns to <CONNENTED>
status, respective pictogram is displayed (see pictogram overview above)
•
if it takes too long to establish connection it may be concluded that connection parameters are
invalid (password etc.), check the parameters and try to reestablish connection,