RADWAG AS X2 Series, Руководство пользователя

Страница: 11 / 132

- 11 -
2. TRANSPORT AND STORAGE
2.1. DELIVERY CHECKLIST
Upon delivery it is necessary to check the package, make sure that your package bears no signs of
damage.
2.2. PACKAGE
Keep all package elements should your device be transported in the future. Remember that only
original packaging can be used for shipping purposes. Prior packing uncouple any cables, remove
any separable components (weighing pan, shields, inserts). Pack the device components into an
original packaging. The original packaging protects the equipment against potential damage during
transportation.
3. UNPACKING AND INSTALLATION
Cut the adhesive tape. Take the device out of the packaging. Open the accessory box, take the
device components out of it.
3.1. PLACE OF USE AND ASSEMBLING
•
The balance should be stored and used in locations free of vibrations and shakes, free of air
movement and dust.
•
Ambient air temperature should not exceed the range of: +10 °C ÷ +40 °C.
•
Ambient relative humidity should not exceed 80%.
•
During balance operation, ambient temperature in the weighing room should not change
rapidly.
•
The balance should be located on a stable wall console desk or a stable working table which is
not affected by vibrations and distant from heat sources.
•
Take special precaution when weighing magnetic objects, as part of the balance is a strong
magnet. Should such loads be weighed, use under-pan weighing option, which removes the
weighed load from area influenced by the balance’s magnet. The hook for under-pan weighing
is installed in balance’s base.
3.2. STANDARD DELIVERY COMPONENTS LIST
•
balance
•
bottom insert (
AS balance exclusively
)
•
centring ring (
AS balance exclusively
)
•
weighing pan, open-work pan for AS with d=0,01/0,1mg exclusively
•
draft shield (AS and PS balances, d=0.001g, exclusively).
•
power supplier
•
user Manual – CD version