Beyond.the.Basics
0
Remote.Operation
Remote access away from home
You can operate your answering system from a remote location
using any touch-tone telephone. Use this function to check for
recorded messages, to play or to delete message. When using
any touch-tone telephone, you can even record a new greeting
message.
1. Call your telephone number.
2. During the greeting message, press 0 and enter your PIN
code. (See “Setting a Personal Security Code (PIN)” on page
40.)
3. The answering system announces the current time and the
number of messages stored in memory. Then you hear “To
play incoming message, press
02
. For help, press
10
”.
You may continue to listen to the Voice Prompts, or you may
select a command from the following chart.
Command
Function
0
and
1
0
and
2
0
and
3
0
and
4
0
and
5
0
and
6
0
and
7
0
and
8
0
and
9
1
and
0
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answering System Off
Voice Prompts
For Memo Record and Greeting Message Record function, the
first time you enter the corresponding command, it starts the
Recording function. If you want to stop the recording, enter the
command again.
*
UC050ZH_43-164_OM3.indd 50
1/9/2007 3:45:59 PM
