Beyond.the.Basics
0
you hear a confirmation tone. Then the announcement “Time”
and the day and time are announced for your review. After a few
seconds, the system announces “To set security code, press
menu again”.
Setting.a.Personal.Security.Code.(PIN)
To play your messages from a remote location, you need to enter
a two-digit Personal Identification Number (PIN) code (01-99). To
select a PIN, perform the following steps:
NOTE
The PIN code is set to “80” when you purchase
your phone.
1. Press
menu/clock
twice in standby mode.
“Security code” and the current PIN code is announced as it
is displayed on the base.
Then the system announces the guidance for setting the PIN
code.
2. Press
volume/select/
or
volume/select/
until the
desired number appears.
3. Press
set
to select the PIN code. you hear a confirmation
tone. Then the announcement “Security code” and the new
PIN code is announced. After a few seconds, the system
announces “To set ring time, press menu again”.
Setting.the.Ring.Time
The ring time setting allows you to set the number of rings the
caller hears before your answering system plays the outgoing
message. You can set the ring time to answer after two, four, or
six rings. Set to (Toll Saver) so the answering system picks up
after two rings if you have new messages, and after four rings
if there are none. This way, if you make a long distance call to
check your messages, you can hang up after the second ring to
avoid billing charges.
UC050ZH_43-164_OM3.indd 40
1/9/2007 3:45:54 PM
