1
Beyond.the.Basics
1. Press
menu/clock
three times in standby mode.
You hear “Ring time” and the current ring time ([ ] two,
[ ] four, [ ] six, [ ] Toll saver), and it is displayed on the
base. Then you hear the guidance for setting the ring time.
2. Press
volume/select/
or
volume/select/
until the
desired ring time appears.
3. Press
set
to select the new ring time. you hear a confirmation
tone. Then the announcement “Ring time” and the new
ring time is announced. After a few seconds, the system
announces “To set record time, press menu again”.
Selecting.the.Message.Record.Time
You have three record time options. The options “
one
minute”
or “
four
minutes” set the duration for recording the incoming
messages. “
Announce only
” answers the call with the preset
greeting or your personal greeting but prevents the caller from
leaving a message.
1. Press
menu/clock
four times in standby mode.
You hear “Record time” and the current recording time
([ ] one minute, [ ] four minutes, [ ] Announce only, No
recording), and it is displayed on the base. Then you hear the
guidance for setting the record time.
2. Press
volume/select/
or
volume/select/
until the
desired time appears.
3. Press
set
to select the new recording time. You hear a
confirmation tone. Then the announcement “Record time”
and new recording time is announced. After a few seconds,
the system announces “To set message alert, press menu
again”.
Announce only feature
The announce only feature plays a prerecorded outgoing
message “Hello, no one is available to take your call. Please call
again.”, and it will not allow the caller to leave a message. To
set “Announce only”, follow the previous steps. The outgoing
message automatically switches to announce only message.
UC050ZH_43-164_OM3.indd 41
1/9/2007 3:45:55 PM
