Beyond.the.Basics
Memory.Dialing.from.Talk.Mode
1. Press
talk/flash
. “Talk” and the volume setting appear.
2. Press
mem
.
3. Press
or
key or enter a number (
0 - 9
) to select the
memory location of the desired phone number. The selected
name is displayed.
4. The phone number in the memory will be dialed when
select/remote
is pressed.
5. To hang up, press
end
or return the handset to the charging
cradle.
NOTE
If you select a memory location that does not have
a stored number, the phone will not dial.
Chain.Dialing
The memory locations on the handset are not limited to phone
numbers. You can also store a group of numbers (up to 20 digits)
that you need to enter once your call connects. This is referred to
as Chain Dialing.
An example of this is a bank account number. Once you have
called your bank, and are prompted to enter the account number,
press
mem
and select the location number where the special
number has been stored. Then press
select/remote
.
Store your special number with an identifying name. (Refer to
“Storing Phone Numbers and Names” on page 25.)
UC050ZH_43-164_OM3.indd 29
1/9/2007 3:45:49 PM
