Beyond.the.Basics
0
Editing.a.Stored.Name.and/or.Phone.
Number
1. Press
mem
, “SELECT MEMoRy” is displayed.
2. Press
or
key, or enter a number (
0 - 9
) to select the
memory location you would like to edit, and press
mem
or
select/remote
.
The screen appears with the memory location number that
you have selected in the display.
3. Press
mem
or
select/remote
.
4. Press
or
key to select “EDIT MEMoRyXX”. Then press
mem
or
select/remote
. “SToRE NAME” is displayed. The
cursor flashes indicating that the display is ready for the
name to be edited. When a name has not been stored, the
cursor appears at the beginning of the second line.
5. Use the number keys,
/tone/
,
#
/
, or
delete/channel
to edit the name. (See “Storing Phone Numbers and Names”
on page 25.) To edit only the phone number, skip this step.
6. Press
mem
or
select/remote
. The cursor flashes indicating
that the display is ready for the number to be edited.
7. Use the number keys,
/tone/
,
#
/
,
redial/pause
or
delete/channel
to edit the phone number. The phone
number cannot exceed 20 digits. (See “Storing Phone
Numbers and Names” on page 25.)
If you don’t want to change the phone number, skip this step.
8. Press
mem
or
select/remote
. If you changed either name
or phone number, a confirmation display shows up. If it
is correct, press
key to select “yES” and press
select/
remote
. you hear a confirmation tone. The memory storage
is complete.
For example, if you edit a name and number into memory
location number 01, the display shows “MEMoRy01
SToRED”. After about two seconds, Select Memory screen is
displayed.
UC050ZH_43-164_OM3.indd 30
1/9/2007 3:45:50 PM
