Beyond.the.Basics
Changing.the.Auto.Talk.and.CIDCW
1. When the phone is in standby mode, press and hold
cid/
menu
.
2. Use
or
key to move the pointer to the selection that
you would like to change. Press
select/remote
to toggle
between “ON” and “OFF” for Auto Talk and CIDCW.
3. Press
end
and return the handset to the base charging cradle
to complete the setting. The handset returns to standby
mode.
NOTE
To enable the setting change of CIDCW, you need
to return the handset to the base cradle when you
complete the setting.
Entering.Your.Area.Code
If you enter a three-digit area code number in the Area Code
option, your local area code does not appear in Caller ID
messages. Do not program this option if your calling area
requires ten-digit dialing. When reviewing Caller ID messages,
you will see only the local seven-digit number. For calls received
from outside your local area code, you will see a full ten-digit
number.
1. When the phone is in standby mode, press and hold
cid/menu
.
2. Press
key to move the pointer down to select “AREA
CoDE”.
3. Press
select/remote
.
NOTE
When the area code has already been stored in
memory, the stored area code will be displayed. To
change it, use the delete/channel and number keys
to enter the new area code. Then press select/
remote. A confirmation tone sounds. To complete
the setting, press end or return the handset to the
charging cradle.
UC050ZH_43-164_OM3.indd 22
1/9/2007 3:45:47 PM
