The.Basics
1
On.a.Wall.Plate.or.Wall
To mount the phone directly on a wall, you need two screws (not
supplied) with heads that fit into the keyhole slots on the base.
Drill two holes 3
15
/
16
inches apart. Thread a screw into each hole,
letting the heads extend about
1
/
8
inch.
1. Plug one end of the supplied modular cord into the
TEL LINE
jack on the back of the base.
2. Plug the supplied AC adapter’s barrel plug into the
DC IN 9V
jack on the back of the base.
3. Route the adapter and modular cords through the base’s
grooves.
4. Plug the adapter into a standard AC outlet. And plug the
modular cord’s other end into a modular phone line jack.
5. For a wall plate, align the
base’s keyhole slots with
the wall plate studs and
slide the base downward
to secure it.
For direct wall mounting,
align the base’s keyhole
slots with the mounting
screws and slide the base
downward to secure it.
UC050ZH_43-164_OM3.indd 14
1/9/2007 3:45:45 PM
