Beyond.the.Basics
Memory.Dialing
Storing.Phone.Numbers.and.Names
Memory Dialing allows you to dial a number using just a few
key presses. Your cordless telephone stores up to ten names/
numbers in the handset.
NOTE
In memory dialing operation, you must press a
key within 30 seconds or the phone will return to
standby mode. If you return the handset to the
cradle, the phone will return to standby mode also.
1. Press
mem
, “SELECT MEMoRy” is displayed.
2. Press
or
key, or enter a number (
0 - 9
) to select the
memory location where you would like to store the number.
3. Press
mem
or
select/remote
.
4. Press
mem
or
select/remote
. The “SToRE NAME” screen
appears and a cursor flashes indicating that the display is
ready for the name to be entered.
If “EDIT MEMoRyXX” appears, the selected memory location
is already stored. Then you must either edit the entry in this
location, delete the entry in this location, or select “Go Back”
to choose another location.
5. To enter a name (up to 13 characters), use the number keys.
See “Steps for Entering Names and Special Characters“ on
page 27.
Use
#
/
and
/tone/
to move the cursor to the
desired location.
Use
delete/channel
to delete characters as needed.
Press and hold
delete/channel
to delete all the characters.
If a name is not required, go to step 6.
•
•
•
•
•
UC050ZH_43-164_OM3.indd 25
1/9/2007 3:45:48 PM
