Beyond.the.Basics
Setting.the.Time
The clock on the answering system starts when power is
supplied to the base. Follow these steps to set the clock to the
correct time.
NOTES
Normally the idle time for the menu mode is ten
seconds before the system returns to standby.
However for setting the time, the idle time is
extended to two minutes.
Press and hold volume/select/
or
volume/
select/
to quickly scroll through the numbers
on the display.
•
•
1. Press
menu/clock
.
The system announces “Time”, the current time and the
guidance for setting the time.
2. Press
volume/select/
or
volume/select/
until the
correct day is announced. The numbers [ ] through [ ] are
displayed on the base.
3. Press
set
to select the day.
4. Press
volume/select/
or
volume/select/
until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
5. Press
set
to select the hour.
6. Press
volume/select/
or
volume/select/
until you hear
the correct minute setting. The numbers [
] through [ ]
are displayed on the base.
7. Press
set
to select the minute.
8. Press
volume/select/
or
volume/select/
until you hear
the correct AM or PM setting. The message counter displays
[ ] or [ ].
9. Press
set
to select the AM/PM setting.
UC050ZH_43-164_OM3.indd 39
1/9/2007 3:45:54 PM
