Beyond.the.Basics
6. Press
6
six times.
7. Press
8
six times.
8. Press
4
six times.
9. Press
3
five times.
10. Press
7
eight times.
11. when finished, press
mem
or
select/remote
.
To continue to store the telephone number, proceed to step 7 on
“Storing Phone Numbers and Names“ on page 26.
If.you.make.a.mistake.while.entering.a.name
Use
/tone/
or
#
/
to move the cursor to the incorrect
character.
Press
delete/channel
to erase the wrong character. Then enter
the correct character.
To delete all characters, press and hold
delete/channel
.
Making.Calls.with.Memory.Dialing
Memory.Dialing.from.Standby.Mode
1. Press
mem
. The handset displays your programmed
memory locations.
2. Press
or
key, or enter the number (
0 - 9
) to select the
memory location you would like to dial.
3. Press
talk/flash
. “Talk” and the volume setting appear on the
display. Then the displayed number is dialed.
NOTES
If you press select/remote or mem before talk/
flash, you can confirm the name and the number
stored in the selected memory location.
To exit the memory function and return to
standby mode without dialing, press end.
Whenever you are using a memory menu screen,
you must press a key within 30 seconds or the
phone will return to standby mode.
•
•
•
UC050ZH_43-164_OM3.indd 28
1/9/2007 3:45:49 PM
