Beyond.the.Basics
Using.Your.Answering.System
The message counter displays the number of messages stored in
memory. If the display flashes, there are new messages waiting
for you. The flashing number represents the number of new
messages, not total messages. This phone is designed to play
your new messages first. After you play all your new messages,
you can then play your old messages.
NOTES
When the answering system is full, [ ] is
displayed on the base, and the system announces
“No remaining time”. You should delete some
messages so that the system can record new
messages.(Refer to “Deleting a message” on
page 48.)
To stop playing your messages, press
(play/
stop) again at any time.
•
•
Playing your messages
1. Press
(
play/stop
) in standby mode.
The system announces the number of new and old
messages. The LED displays the number of messages. If the
display flashes, new messages are waiting for you. The day
and time that each message was received are announced
after the message is played. The message counter displays
the number of current messages stored.
When all new messages have been played, you hear a
confirmation tone and an announcement “End of messages”.
The system returns to standby.
2. After you have reviewed all of your new messages, you can
play your old messages by pressing
(
play/stop
) again.
The old messages will be played in the order in which they
were received.
UC050ZH_43-164_OM3.indd 46
1/9/2007 3:45:58 PM
