Rackable Systems OmniStor 4900F Series, Руководство пользователя

Страница: 164 / 196

Chapter 6 - Maintenance
Replacing a DC Power Supply
150
3
Using your thumb and fore finger, squeeze the power supply release latch while
pulling the power supply from the enclosure.
4
Remove the replacement power supply from the shipping container and inspect
for obvious damage. Save the packaging material.
5
Install the new power supply by sliding it into its open bay and ensuring it seats
completely and the release latch resets.
6
Re-connect the DC power cable. Insert the power cable connector into the DC
power cable module. It secures when the connector’s latches reset.
7
Turn the On/Off switch to the “On” position on the replacement power supply.
NOTE:
The front bezel Power Supply Status LED will return to a normal state
(steady green).
8
Using the packaging material from the replacement power supply, repackage and
return the failed power supply per your RMA instructions.