Rackable Systems OmniStor 4900F Series, Руководство пользователя

Страница: 141 / 196

Chapter 4 - Managing and Monitoring
Uploading SES Controller Card Firmware
127
NOTE:
Ensure that the protocol “Xmodem” is selected.
From the Xmodem send screen you can monitor the progress of the upload. You
can safely stop the transfer without affecting your existing firmware any time
during the transfer until it has been completed. The upload does not overwrite
the firmware during the upload process, it writes the new code into unused
EEPROM space until completed, then erases the flash and re-programs the new
firmware code to the EEPROM active region.
If you elect to stop an upload in progress, ensure that the stop (abort) command
was completed by typing <Control-X> at the cursor.
Xmodem Transfer Screen
9
Verify the new firmware has successfully loaded, type <Control-E>.
10
Press the <Esc> key to return to the terminal utility main menu.