Racepak Ultra Dash Xtreme, Инструкция по установке и эксплуатации

Страница: 40 / 41

Viewi ng Real Time Data on a PC
36
The first parameter Circular Buffer Length is used to set the amount of data to record in seconds. The
Recording Mode is used to determine whether the recording will stop when the maximum record time is
reached or whether the oldest data will be overwritten. For example if a Circular Buffer Length of 1000
seconds is entered and stop after reaching end of buffer is selected, the program will record data for 1000
seconds and stop. If continue until stopped manually -overwrite oldest data is selected the program will
continuously record until stop by the operator. Only the last 1000 seconds of data will be stored.
Starting a Telemetry Session
The next step is to start a telemetry session. Select the Telemetry icon shown below or the New Telem
Session menu item located in the File main menu selection. A dialog box, as shown below will be
displayed and you will then be asked to select the configuration file to use for this session.
Select the configuration file as setup above. A dialog b ox will then be displayed to allow you to enter the
session information (the same as when uploading run data). Enter the appropriate year, track, race type,
and race sequence information as shown below. The system will enter the date and time.
If you need help in filling out the dialog box click on the help icon located in the upper left-hand corner of
the dialog box.
Select
OK or Next depending on your configuration file. Additional dialog boxes may be displayed.
These are part of the Run Log sections that are user programmable to allow test information to be entered
during the download process. Fill out the information as appropriate.