Racepak Ultra Dash Xtreme, Инструкция по установке и эксплуатации

Страница: 25 / 41

Programming and Operation Using the Dash Buttons
21
Clearing Alpha Display Warnings
When a alpha warning is activated in the lower left position on the LCD, the display will toggle back and
forth between the alpha warning tag and channel data that is normally displayed in that position. You may
clear the alpha warning by entering a MED press on the button. This will clear the warning only for
that occurrence. If the input that activated the warning falls below the warning limit and is later activated
again, the alpha warning will turn back on.
IMPORTANT WARNING!!:
If you manually clear an alpha warning it is up to you to remember there was problem.
For instance, if you clear the low oil warning there may be no further warnings to remind
you of the condition. If you damage your engine Racepak cannot be held responsible.
USE THE CLEAR FEATURE AT YOUR OWN RISK!!