Racepak Ultra Dash Xtreme, Инструкция по установке и эксплуатации

Страница: 35 / 41

Programming Using the DataLink PC Software
31
the record threshold. If you have selected a channel such as Engine Rpm enter the desired rpm above
which to start the recording. For instance 3000 rpm. The recording will begin any time the engine rpm
exceeds 3000 rpm.
To program the record threshold select the
Start recording when channel exceeds value option as
described above and enter the desired value in the option edit box.
Sending the Record Parameters
The final step in programming the record parameters on your dash is to send the configuration you just
edited to from your PC to your dash over the serial communication cable. To send the information click on
the
Send Configuration button located in the lower left-hand section of the logger dialog box. A progress
box will be displayed showing the information being transferred to your dash. When completed the last
line in the progress box should read
Devices Programmed Successfully .
After you have completed the programming of your dash the changes will become effective the next time
you turn your data logger on.