Racepak Ultra Dash Xtreme, Инструкция по установке и эксплуатации

Страница: 27 / 41

Programming Using the DataLink PC Software
23
Programming Using the DataLink PC software
The first step is to install the DataLink software in you PC computer. The DataLink software is used to
program and configure your Ultra Dash. If you have purchased the PC download package you can also
view real time data and upload recorded data from the dash for analysis.
Installing the DataLink Software
The DataLink software manual will guide you through the installation of the software. Before you begin,
please read the following notes.
DataLink Software CD Installation
Insert the disk in you CD drive and close the bay door. The installation program should run
automatically. If it does not, follow the instructions printed on the CD label.
Installing the License Disk
A software license disk (a 3.5-inch floppy) will have been supplied with the DataLink software
only if you have purchased the PC download package. If you have only purchased the PC
programming software then you will only get a DataLink CD and not a license disk. The license
disk contains a default configuration file for your new system and the security keys required to
properly use the DataLink software with your Ultra Dash.
The DataLink software should ask you for a license disk the first time you start the program after a
new installation. If you have purchased the PC download package you will need to insert the disk
and click on the OK button. If you have purchased the PC programming software then just click
on the “Demo Only” button. If you are not prompted for a license disk or you are adding an new
dash to an existing DataLink download installation you will need to select Read License Disk for
the Security main menu item. When
the Select Items to Copy dialog box appears make sure you
check the Copy Configuration Files and Copy License Keys boxes before proceeding. This will
add the new security keys, folder structure and configuration file to the existing DataLink
installation.
Connecting the Data Logger Serial Communications Cable
The next step is to connect the data logger’s serial
communication cable (supplied with your data
logger system) to the serial communications port on
your PC. You will be connecting the DB9 female
connector end of the logger serial communication
cable to the mating connector on your PC. In most
computer systems the mating connector will be
labeled “Serial” or “COM”. If your PC does not
have a serial port you can use a USB to serial port
adaptor. These adaptors are available at most
computer stores for around $50.
The next step in the software installation is to tell
the DataLink software which serial communications
port on your PC you have connected to the serial
communications cable. To do this, turn on your PC
and start the DataLink program by clicking on the
ICON on the Window’s desktop. Next click on