Racepak Ultra Dash Xtreme, Инструкция по установке и эксплуатации

Страница: 24 / 41

Programming and Operation Using the Dash Buttons
20
Toggle lower right channel
position between odometer,
trip, EGT 3 & EGT 4
Does nothing Reset trip odometer
Step recoded data forward
.02 seconds
If playing real-time - Stop
Start playing
recorded data at
real- time speed.
Fast forward through recorded
data
(press and hold)
Step recorded data
backward .02 seconds
If playing real-time - Stop
Rewind recorded
data to beginning
Fast reverse through recorded
data
(press and hold)
Table 8
Warning Indicators
Your Ultra Dash has three types of warning indicators.
•
Internal warning light in the upper left and right hand corners.
•
Alpha display in the lower left position on the LCD.
•
External warning light output. (see Wiring Port B ).
All of the warning inputs do not activate all three warning indicator types. Some only activate the alpha
display, while others activate all three.
.
Table 9 shows which warning types are activated by each warning indicator.
Warning Cause
Alpha
Warning
Tag
External
Warning
Upper Left
Internal
Warning
Upper
Right
Internal
Warning
Water Temp. Sensor H2OT X X
Water Temp. Switch H20T X X
Low Oil Level OIL
Detonation DET X X
Premium Fuel Required PREM
High Beam X
EGT 1 EGT1 X X
EGT 2 EGT2 X X
EGT 3 EGT3 X X
EGT 4 EGT4 X X
Engine Rev Limit RPM X X
Table 9
Note: The warning indicators setting listed in table 9 are the factory defaults. The warning tag and type of
warning indicator activated can be changed using the DataLink PC software.