28
Subject to technical change without notice
09.2003
29
Subject to technical change without notice
09.2003
09.2003
54
55
56
56.1
4.3 Factory set-up
When the
<P>
key is pressed for the
parameter menu screens, the screen in
fig.54
appears.
After this, press the
<3>
key on the
numeric keypad to go to the Factory Set-up
menu. Various settings 4.3.1 to 4.3.4 can be
carried out here.
4.3.1 CONFIG TYPE 4
No modifications may be carried out here.
4.3.2 Establish a connection
The connections with which the PRO S8000
is equipped can be seen.
Modifications may only be made if additional
equipment (GPS Fieldstar) is to be
connected.
4.3.3 Diagnosis
Do not make any modifications here.
4.3.4 HISTORY
a)
This displays the total surface
covered by the machine.
b)
An error evaluation of the CAN bus is
possible.
4.4 RABE SETTINGS
(fig 56.1)
4.4.1 Machine type
(not visible)
No modifications may be carried out here.
4.4.2 Early start time delay
(pre-start)
Press the
<2>
key on the numeric keypad
to access the ”Time delay menu” (
Fig. 56
).
The delay and reaction times can be
modified by the entry of new values through
the numeric keypad.
These values can be defined as follows:
By pressing the
<5>
key on the numeric
keypad you may choose whether pre-start is
to be activated automatically or manually.
