14
Subject to technical change without notice
09.2003
15
Subject to technical change without notice
09.2003
09.2003
27
28
29
3.2.4 Software key functions
<S3> Tramline settings
Tramline rhythm and execution can be
preselected in this screen (
fig. 27
).
Rhythms from 1 (permanent tramline)
to 12 are possible, symmetrically or
asymmetrically right or left. Custom
rhythms are also available which enable the
laying down of correct tramlines.
After the correct setting has been selected
with the arrow keys, exit the display with
<ESC>
.
3.2.5 Software key functions
<S4> Warning parameters
This is where the monitored parameters
(
fig. 28
) of the seed drill are displayed.
It is not usually necessary to modify the
preset parameters, but different values can
be set using the numerical pad.
Thus it can on occasion be useful to switch
off the warning function for a time.
Thus, for example if the fan sensor is out of
order, fan monitoring can be switched off by
setting the lower fan speed (LO) limit to 0.
Please ensure that the machine does
not sow below the lower fan speed limit
(danger of blockages).
The alarm for low hopper level can also be
switched off if there is only a small amount
of seed in the hopper.
To do this, move the marker arrow to
the corresponding line (below) and select
between ON and OFF with the right/left
keys.
3.2.6 Software key functions
<S5> Job management
Working with predefined jobs (
fig. 29
)
requires additional hardware components
such as an external drive and/or a GPS
receiver, etc. Unless additional components
are connected, this key has no effect.
