16
Subject to technical change without notice
09.2003
17
Subject to technical change without notice
09.2003
09.2003
31
32
31.1
3.4 Function screen
”RATE” <R>
3.4.1 Display seed rate
The function screen
”RATE”
makes a wide
range of information available on the current
seed rate and its modification. To reach this
screen, just press the
<R>
key.
The following screen appears (
Fig. 31
):
The large display is the current seed rate.
The maximum permitted speed of travel is
displayed as a second figure (this may be
appreciably less than 18 km/h for high seed
rates).
Below this is the calibrated seed rate in kg/
ha (as a reference).
The final value is the deviation in % of the
current seed rate from the calibrated value.
3.4.2 Changing the rate on the
move
Use the +/- keys (
<S2>, <S3>
) (
fig. 31
)
to increase or reduce the seed rate in the
preset displayed step (e.g. 5%).
The range is from -50% to +50% of the
calibrated quantity
(fig. 31.1)
.
Use the <S4> key to return directly to
the calibrated quantity. The increased or
reduced quantity is displayed in % in the
main screen.
3.5 INFO screen <I>
3.5.1 Display values
To reach the
INFO
screen, press the
<I>
key on the right hand side of the screen.
The following screen appears
(fig. 32)
.
The display shows the area, seed quantity
applied to this area, and date and time from
which these values are counted.
