8
Subject to technical change without notice
09.2003
9
Subject to technical change without notice
09.2003
09.2003
S1 S2 S3 S4 S5
I
P
R
M
ON / OFF
Back
Enter / Return
8
c
d
b
a
3. Working with the control program
3.1 Main screen – ”Main” <M>
The following screen, which is displayed after switching on, shows at a glance all essential
working data for the seed drill. For this purpose, the display is divided into a number of areas.
At the very top is the Info-bar with the time.
Below is a block display, with speed of travel
(a)
, tramline pattern and rhythm
(b)
, fan speed
(c)
, and seed rate, with the over/under step in percent
(d)
. The symbols below this indicate
the meaning of the softkeys, which are located below. These are on the main function screen
<M>
:
<S1>
: Pre-start
<S2>
: Metering wheel stop
<S3>
: not assigned
<S4>
: Tramline counter stop
<S5>
: Manual tramline correction
