Quincy QSV 2200, Инструкция по эксплуатации

Страница: 9 / 124

Section I - Safety precautions
Quincy Vacuum Pump-QSV Series 9
activated, a sign stating "This machine may start without warning" must be affixed near the instrument
panel.
12. Never remove or tamper with the safety devices, guards or insulation fitted on the machine.
13.
Piping or other parts with a temperature in excess of 70˚C (158˚F) and which may be accidentally
touched by personnel in normal operation must be guarded or insulated. Other high temperature piping
must be clearly marked.
14. If the ground is not level or can be subject to variable inclination, consult the manufacturer.
15. Pump outlet air contains traces of oil mist. Ensure compatibility with the working environment.
16. Any vacuum pump placed in an application with inlet gas stream temperatures above the published
maximum temperature should be approved by Quincy prior to start-up.
17. For water-cooled machines, the cooling water system installed outside the machine has to be
protected by a safety device with set pressure according to the maximum cooling water inlet pressure.
NOTICE!
Also consult sections Safety precautions during operation and Safety precautions during
maintenance or repair .
These precautions apply to machinery processing or consuming air or inert gas. Processing of any
other gas requires additional safety precautions typical to the application which are not included
herein.
Some precautions are general and cover several machine types and equipment; hence some
statements may not apply to your machine.
1.4 Safety precautions during operation
CAUTION!
All responsibility for any damage or injury resulting from neglecting these precautions, or non-
observance of the normal caution and care required for installation, operation, maintenance and
repair, even if not expressly stated, will be disclaimed by the manufacturer.
Precautions during operation
1. Never touch any piping or components of the vacuum pump during operation.
2. Use only the correct type and size of hose end fittings and connections. Make sure that a hose is fully
depressurized before disconnecting it.
3. Persons switching on remotely controlled machines shall take adequate precautions to ensure that
there is no one checking or working on the machine. To this end, a suitable notice shall be affixed to
the remote start equipment.
4. Never operate the machine when there is a possibility of taking in flammable or toxic fumes, vapours or
particles.
5. Never operate the machine below or in excess of its limit ratings.
6. Keep all bodywork doors shut during operation. The doors may be opened for short periods only, e.g.
to carry out routine checks. Wear ear protectors when opening a door.
On vacuum pumps without bodywork, wear ear protection in the vicinity of the machine.
7. People staying in environments or rooms where the sound pressure level reaches or exceeds 80 dB(A)
shall wear ear protectors.