Quincy QSV 2200, Инструкция по эксплуатации

Страница: 31 / 124

Section III - Airlogic Graphic controller
Quincy Vacuum Pump-QSV Series 31
(i) Inputs
(ii) Discharge pressure
(iii) Inlet pressure
(iv) Emergency stop
(v) Pressure setting selection

The screen shows a list of all inputs with their corresponding icons and readings.

If an input is in warning or shutdown, the original icon is replaced by the warning or shutdown icon
respectively (i.e. the Stop icon and the Warning icon in the screen shown above).
A small chart icon, shown below an item in the list means this input signal is shown on the chart at the
main screen. Any analog input can be selected.
Selecting another input signal as main chart signal
With the Modify button active (light grey background in above screen), press the Enter button on the
controller. A screen similar to the one below appears: