Quincy QSV 2200, Инструкция по эксплуатации

Страница: 94 / 124

Section VIII – Maintenance
94 Quincy Vacuum Pump-QSV Series
CAUTION!
The vessel cover is supported by two gas springs, from which one is executed with a locking tube.
To close the cover, press the locking tube as instructed on the gas spring. Always support the
cover by hand while manipulating it to avoid unwanted closure
.

Close the cover of all separator tank. Caution not to squeeze the O-ring.

Tighten bolts.
7.8 Pressure switch
Testing
CAUTION!
The pressure switch test can only be performed by authorized personnel and is protected by a
security code. Refer to Airlogic Graphic controller.
If the pressure switch does not open at the set pressure of 1500mbar (a), it needs to be replaced.
WARNING!
No adjustments are allowed. Never run the vacuum pump without pressure switch .
7.9 Service kits
Service kits
For overhauling and for preventive maintenance, a wide range of service kits is available. Service kits
comprise all parts required for servicing the component and offer the benefits of genuine Quincy parts while
keeping the maintenance budget low.
Also a full range of extensively tested lubricants, suitable for your specific needs is available to keep the
vacuum pump in excellent condition.
Consult the Spare Parts List for part numbers.