Quincy Compressor QSI Series, Инструкция по эксплуатации

Страница: 76 / 142

Section IV - Operating Procedures
74
Quincy Compressor-QSI
®
7 Delta time Setting used to decide to load an unloaded
compressor or to start a stopped compressor.
• All the timer options can be changed to a unit of 1 incremental. The manual sequence shift up/down delay cannot
be changed once compressor starts running in the ECO mode.
• Final option under compressors is “Group sequences” . Here, the group sequences are created for the manual
sequence mode. As only six compressors can be connected at one particular network, so six groups can be defined
at a maximum. To use this, first using scroll keys move cursor to group sequences and then press Enter key. Fol -
lowing window appears:
• To assign these groups, first group sequence has to be just 1. Then, the next group sequence would be 1-2 and so
on. However, it’s possible to break the serial and set the sequence randomly depending on the customer needs. As
an example, it is possible to assign 2-4-5-1-3 and so forth.