Chapter 2 Installation Procedures
Installing the External GoVault Tabletop Dock
GoVault™ for Windows User’s Guide
15
Installing the External GoVault Tabletop Dock
Install the external GoVault Tabletop dock and cartridge as follows:
1
Connect the drive-end (Mini-B) connector of the USB interface cable
to the Mini-B USB port on the rear panel of the GoVault Tabletop
dock (see
figure 10
).
2
Connect the DC power output plug of the power adapter/converter
to the DC power jack on the rear panel of the dock.
3
Carefully position the dock in a secure location that provides
adequate circulation for the rear panel air vents (see
figure 10
).
4
Plug the power adapter/converter into a 115/230 VAC facility power
receptacle and verify that the LED on the front panel of the GoVault
Tabletop dock illuminates.
Figure 10 GoVault Tabletop
Rear Panel
5
Connect the system-end (standard) connector of the USB interface
cable to an available USB port on your workstation or server system
and verify that the system launches the
Found New Hardware
wizard
that finds and configures the device driver, assigns a drive letter, and
enables read/write access.
6
Use Windows
My Computer
to verify successful GoVault Tabletop
configuration (see
figure 9
).
Air vents
Mini-B USB port
DC power jack
Содержание GoVault 40GB
Страница 12: ...Preface GoVault for Windows User s Guide xii...
