Chapter 2 Installation Procedures
Installing the Internal GoVault Dock
GoVault™ for Windows User’s Guide
10
2
Remove the cover from the workstation or server system.
3
Install the SATA card in an available PCI slot, and secure the card to
the computer using one screw (see
figure 3
).
Figure 3 Installing the SATA
Card
Installing the Internal
GoVault Dock
2
After you have installed the SATA card, or if your computer workstation
or server system already has either a SATA-equipped motherboard or a
SATA-compliant host bus adapter PCI card, use the following procedure
to install the internal GoVault dock.
Note:
See your computer manufacturer’s instructions for the
proper procedures to remove the cover.
Note:
The standard configuration of the internal GoVault dock
includes side brackets and a 5.25-inch bezel for installation in a
5.25-inch drive bay. If you need to install the dock in a 3.5-inch
drive bay, use the procedure in
appendix A
on page 62 to
remove the side brackets and change the bezel before
installing the internal GoVault dock.
PCI slot
SATA card
Содержание GoVault 40GB
Страница 12: ...Preface GoVault for Windows User s Guide xii...