quadient AS-850, Руководство пользователя

Страница: 50 / 86

SECTION 3
OPERATING PRINTER
50
NOTICE: Head numbers are not displayed correctly, in the Layout, when “Print inverted” is changed from
what is shown on previous page. For example; when using “normal” print (Print inverted = No) on an
AS-850 (left to right feed model), Head #1 should be at the bottom and Head #8 should be at the top of
the Layout. This is not the case.
AS-850 (left to right feed model) with AS-850(L2R) Printer Driver
Print inverted: No = “ normal ” – print up-side-down to operator
Print inverted: Yes = “ inverted ” – print right-side-up to operator
AS-850R (right to left feed model) with AS-850(R2L) Printer Driver
Print inverted: No = “ normal ” – print right-side-up to operator
Print inverted: Yes = “ inverted ” – print up-side-down to operator
d. The “Solid Line”, in the layout, represents the
separation point between Print Units.
e. The “Dashed Lines”, in the Layout, represent
the approximate separation points between
Heads (cartridges).
TIP : For best print results, try to position
elements so text and graphics are not split
between Heads or Print Units. If you split
text/graphics between Heads or Print Units
some misalignment, between the upper and
lower sections of the text/graphic, is likely to
occur.
5.
Click on the
"Go to Preview Mode"
icon , located in the upper left-hand corner of the Bulk Mailer
"designer" screen. The “print preview” screen will open.
You can use the arrow buttons, located at the top of the “print preview” screen, to toggle through the records
in the mailing list and see how they are displayed.
TIP
: Click on the "Go to Designer Mode" icon , to return to the "designer" screen.