quadient AS-850, Руководство пользователя

Страница: 65 / 86

SECTION 4
MAINTENANCE
65
Solvent Ink Cartridge Use & Care
Valid for EASYInk UltraUV (ASINKHPUUV) and EASYInk UltraSolv (ASINKHPUSLV) Ink Cartridges
CAUTION
Solvent Inks are Toxic and Flammable
•
Avoid contact with skin, eyes and clothing. Wear personal protective equipment.
•
Avoid breathing vapors or mists of this product. Use with adequate ventilation.
•
Keep away from heat, sparks and flame. No smoking.
• Keep out of the reach of children.
• Keep storage containers tightly closed in a dry, cool and well-ventilated place.
• Dispose of product in accordance with local/regional/national/international regulations.
• Please refer to the Safety Data Sheets, available from our website, for additional safety
information.
Ink Cartridge Use – Solvent Inks
NOTE: Solvent inks have limited parameters for use. Please be sure to the read and follow the instructions,
provided below, when using Solvent Ink Cartridges.
1. A Conveyor is required when printing with Solvent Inks.
Printed image must be dry before anything makes contact with it.
2. Never use a Dryer when printing with “Solvent Inks”.
CAUTION! Solvent Inks (EASYInk UltraUV & EASYInk UltraSolv) are flammable.
3. Make sure printer’s "Purge First Piece" feature is disabled (turned off).
Printing with this feature enabled can damage or shorten the life of the Solvent Ink cartridge(s).
NOTICE: The “Purge First Piece” feature will commonly be enabled (turned on) when you receive a new
printer, since this is the printer’s “default” setting.
You must disable this feature before attempting to print with Solvent Inks.
To access the “Purge First Piece” feature, select “Printer Setup” from the “Main Menu”. Then select
“Printer Preferences”. Located and disable (un-check) the “Purge First Piece” feature.
4. The printer’s “Purge Print” feature should NOT be used more than once a day.
More frequent use of “Purge Print” can damage or shorten the life of the Solvent Ink cartridge(s).
5. Printer’s Transport Speed (Belt Speed) must be set to 1 (Low speed).
Do NOT use/select Speeds 2 (Medium), 3 (Medium High) or 4 (High) with Solvent Inks.
Damage to the Solvent Ink cartridge(s) may result.
6. Do NOT set Print Quality (resolution) higher than 300 DPI when using Solvent Inks.
A Print Quality (resolution) of 150 or 200 DPI is recommended.
The 600 DPI selection should NEVER be used with Solvent Inks.
Damage to the Solvent Ink cartridge(s) may result.