quadient AS-850, Руководство пользователя

Страница: 18 / 86

SECTION 3
OPERATING PRINTER
18
Media Thickness Adjustment
1. Position the Exit Pressure Roller Assembly [C] and Media Control Guide [D] towards the side of the
printer, so they are out of the way.
2.
Turn Media Thickness Knob
[A]
in the proper
direction to raise the Printhead Carriage to its
highest position.
AS-850 (L2R)
– Turn Knob counter-clockwise to
raise carriage.
AS-850R (R2L) – Turn Knob clockwise to raise
carriage.
3. Slide a piece of media [B] under Printheads 7, 8.
Tip: Be careful not to slide media in too far. You
don’t want media to be positioned under any of
the Pressure Rollers.
4.
Adjust the Media Thickness Knob
[A]
to lower the
Printhead Carriage until the bottom of the Print
Unit just touches the Media. Then remove the
Media.
Tip: If the Media cannot be pulled out easily from
under the Print Unit. Turn Media Thickness Knob,
in the proper direction to raise the Printhead
Carriage, until Media [B] can be pulled from
under Print Unit with only a slight drag.
NOTE: These are initial settings. It may be
necessary to adjust the Media Thickness Control
to optimize print quality. Make a note of the knob
position for future reference for that Media.
5. Position the Exit Pressure Roller Assembly [C] so
it rides on the Media as it exits. Position the
Media Control Guide [D] so it holds down the Media as it feeds.
Tip: To prevent image smearing, make sure these items do not track over any printed information.
6. Turn Printer ON.
7.
Test feed media by pressing “Test Feed” on the Quick Menu Touchscreen.