quadient AS-850 Скачать руководство пользователя страница 62

Страница: 62 / 86

SECTION 4
MAINTENANCE

Ink Cartridge (Printhead) Disposal

Dispose of product in accordance with local/regional/national/international regulations.

Ink in cartridge may be harmful if swallowed.

Keep new and used cartridges out of reach of children.

Discard empty cartridges immediately.

Ink Cartridge (Printhead) Care

CAUTION

Ink Cartridge Care instructions are different for Water-Based and Solvent Inks, please be sure to follow

the appropriate instructions. In addition, Solvent inks have limited parameters for use. Please be sure to follow the

instructions for “Solvent Ink Cartridge Use & Care”, when using Solvent Inks.

Water-Based Ink Cartridge Care

Valid for the following inkjet cartridges:

EASYInk Versario (ASINKHPVRSA), EASYInk Coated Plus (ASINKHPCTP), EASYInk Aqueous High Performance

(ASINKHPAQP), EASYInk Fast Black (ASINKHPFAST), EASYInk Blue (ASINKHPBLUE), EASYInk Red (ASINKHPRED),

EASYInk Green (ASINKHPGREEN), EASYInk Invisible (ASINKHPINV).

Before Installing Cartridges into Printer

Remove Ink Cartridge from Storage Clip.

TIP

: To avoid mixing Storage Clips used with Water-Based and

Solvent inks, mark Water-Based Storage Clips with “W” and
Solvent Storage Clips with “S”.

Clean Pad, in the Storage Clip, as described on next page.

Clean Ink Cartridge nozzles, as described on next page.

Install Ink Cartridge into printer, as described in section titled
“

Install Ink Cartridges (Printheads)

”.

During Printing as Needed

(If you experience clogged nozzles during printing)

PAUSE printer.

Remove Ink Cartridge from printer.

Clean Ink Cartridge nozzles as described on next page.

Install Ink Cartridge into printer as described in section titled
“

Install Ink Cartridges (Printheads)

”.

Press RESUME to continue printing.

When Ink Cartridges are Not In Use:

Ink Cartridges must be properly cleaned and stored when not in use.

Remove Ink Cartridge from printer.

Verify that Pad, in the Storage Clip, is clean. If not clean as described on next page.

Clean Ink Cartridge nozzles, as described on next page.

Install Ink Cartridge into clean Storage Clip.

NOTE:

Storage Clips from Water-Based Ink Cartridges should not be used with Solvent Ink Cartridges

and vice-versa.

Place sealed Cartridge, with contacts facing down, into a tightly sealed storage container.

Store in a cool, dry and well-ventilated place.

Contacts

Nozzle Plate

(nozzles)

Pad

Storage Clip

Содержание AS-850























































































Результаты поиска

Содержание AS-850

Отзывы:

Похожие инструкции для AS-850

Бренды по названию

Популярные бренды

quadient AS-850, Руководство пользователя

Результаты поиска

Содержание AS-850

Отзывы:

Похожие инструкции для AS-850

Бренды по названию

Популярные бренды