quadient AS-850, Руководство пользователя

Страница: 54 / 86

SECTION 3
OPERATING PRINTER
54
Dashed Lines = Head (cartridge) separation
This gray area represents the separation between Print Units
This gray area represents the separation between Print Units
4. Click on the “ DATA” Tab to link a data file to the Project.
Click on “ ? ” symbol, located at top corner of FlexMail window, for help linking “ Datasources ”.
5. Click on the “ DESIGNER” Tab to add elements to the Layout.
Once the Layout is setup to represent the AS-850 printer and your desired Page Size, you are ready to start
adding elements, such as Text (including data fields), Barcodes and Pictures, to the Layout.
The following Layout example was designed for an AS-850 and a Page Size measuring 7” Width x 5” Height.
The Layout shows three Print Units. Top Print Unit with two cartridges (Heads), middle Print Unit with four
cartridges and a bottom Print Unit with two cartridges.
On the top Print Unit (top two Heads) there is a “Text Box” (Return Address) element positioned at the top-left
and an “Indicia” element positioned at the top-right.
On the middle Print Unit (middle four Heads) there is a “Text Box” (Immediate Attention Requested) element,
and a “Text Box” (Address Block) element.
On the bottom Print Unit (bottom two Heads) there is a “Barcode Box” (Intelligent Mail Barcode) element.
a. The “Dashed Lines”, in the Layout, represent the approximate separation points between Heads
(cartridges).
TIP : For best print results, try to position elements so text and graphics are not split between Heads or
Print Units. If you split text/graphics between Heads or Print Units some misalignment, between the
upper and lower sections of the text/graphic, is likely to occur.
b. Click and drag elements, such as the “Text Box” or “Barcode
Box”, to the desired print location in the Layout.
c. Click on an element, such as a “Text Box”, to access and
change Font Options for this element.
Font Options and other features for the selected element
can be accessed at the top of the screen.
NOTICE: FlexMail does not provide Head number
references in the FlexMail Layout.
This eliminates the need to show a different Head
numbering order, in Layout, when selecting between
“Normal” and “Inverted” print orientations.