quadient AS-850, Руководство пользователя

Страница: 39 / 86

SECTION 3
OPERATING PRINTER
39
Horizontal Alignment
Adjust offset of individual Printheads (
side-to-side
)
Range: ±100 (each step is 1/1000 of an inch).
Press “
Test Print ” to check alignment.
Press “ Reset ” to set all values back to zero.
See “HORIZONTAL ALIGNMENT”, in section titled
“Using the Touchscreen”
, for more details.
NOTICE: This feature is not accessible when there is job
data in the printer.
Vertical Alignment
Use this feature to disable/enable top nozzles, in
individual Printheads, to fine-adjust nozzle overlap.
Range: ±12 (each step is 1/1000 of an inch).
NOTE : You can NOT adjust the vertical alignment of
HEAD 1, since this is the reference position.
Press “
Test Print ” to check alignment.
Press “ Reset ” to set all values back to zero.
See “VERTICAL ALIGNMENT”, in section titled
“Using
the Touchscreen”,
for more details.
NOTICE: This feature is not accessible when there is job data in the printer.
Printer Preferences
Select and set various Printer features including Purge
First Piece , Automatic Feed Start , Keep Nozzle Alive ,
Tray Break , Continuous Batch Counter and Feeder
Delay .
See “PRINTER PREFERENCES”, in section titled
“Using
the Touchscreen”,
for more details.
NOTICE: Some Printer Preference features are not
accessible when there is job data in the printer.
Ink Status
Shows the percentage (%) of ink remaining in each Ink
Cartridge (HEAD#) and the estimated number of prints
(LIFE) remaining at a selected print quality (resolution).
Select a Resolution from the choices (150, 200, 300,
600) on the right-hand side of the screen.
NOTE: Estimation is based on the last page printed.
See “Ink Status” in section titled
“Using the
Touchscreen”
, for more details.