quadient AS-850, Руководство пользователя

Страница: 61 / 86

SECTION 4
MAINTENANCE
61
Foil Torn
Replace Inkjet Cartridge (Printhead):
CAUTION! Be sure the contact area of the cartridge is dry, before installing
it into the printer or damage to printer’s electronics will result.
1. Open Latch Lever fully.
2.
Pull top of Cartridge away from Latch, just enough to clear Latch.
3. Pull Cartridge straight up and out of Pen Stall.
Try NOT to angle Cartridge as it is being removed.
4. Remove new Inkjet Cartridge from packaging.
Take care not to touch contacts or Nozzle Plate.
Remove protective tape or clip from Cartridge Nozzle Plate.
5. With Cartridge Nozzle Plate pointing down, gently place Cartridge into
Pen Stall with cartridge as up-right as possible.
6. Push down on Cartridge until it bottoms out in Pen Stall.
Do NOT push Cartridge towards Latch.
7. Carefully Close Latch Lever to secure Cartridge.
The Latch Lever is designed to swing the cartridge
into proper alignment with the pogo-pins
(contacts) as it is closed.
DO NOT force Latch Lever closed.
TIP : Opening and Closing Latch may fix a contact
problem between pogo-pins and cartridge
contacts, due to misalignment.
8. Repeat the above steps for remaining Cartridges.
CAUTION
Damage to Ink Carriage and or electronics can occur if you insert or
remove Cartridge at too steep of an angle. Cartridge foil may be
damaged/torn by strong contact with pogo-pins (electrical contacts in
Pen Stall) during install/removal of Cartridge.