Qlogic SANbox2 SANbox2-64, Руководство пользователя

Страница: 152 / 224

A – Command Line Interface
Show Command
A-48 59048-01 A
Link Failures Number of optical link failures detected by
this port. A link failure is a loss of
synchronization for a period of time
greater than the value of R_T_TOV or by
loss of signal while not in the offline state.
A loss of signal causes the switch to
attempt to re-establish the link. If the link is
not re-established by the time specified by
R_T_TOV, a link failure is counted. A link
reset is performed after a link failure.
Login Time when user logged in.
Logout Time when user logged out.
LoopTimeouts A two (2) second timeout as specified by
FC-AL-2.
LossOfSync Number of synchronization losses (>100
ms) detected by this port. A loss of
synchronization is detected by receipt of
an invalid transmission word.
PrimSeqErrors Primitive sequence errors detected.
EportConnects Shows the count of the number of times an
E_Port connected through ISL negotiation.
RxLinkResets Number of link reset primitives received
from an attached device.
RxOfflineSeq Number of offline sequences received. An
OLS is issued for link initialization, a
Receive & Recognize Not_Operational
(NOS) state, or to enter the offline state.
TotalErrors Total number of errors detected.
TotalLIPsRecvd Number of loop initialization primitive
frames received by this port.
TotalLinkResets Total number of link reset primatives.
TotalOfflineSeq Total number of Offline Sequences issued
by this port.
TotalRxFrames Total number of frames received by this
port.
Table A-13. Show Port Parameters (Continued)
Entry Description