Qlogic SANbox2 SANbox2-64, Руководство пользователя

Страница: 21 / 224

2 – Using SANbox Manager
Uninstalling SANbox Manager
59048-01 A 2-9
2.4
Uninstalling SANbox Manager
A program to uninstall SANbox Manager was installed as part of the SANbox
Manager installation process. The Uninstaller Data folder in the Install folder
contains the uninstall program (Uninstall SANbox Manager). Also, a shortcut/link
to the uninstall program was installed in the installation directory during the
SANbox Manager installation process. The default installation directory is /
QLogic_Corporation/SANbox_Manager.
To uninstall the SANbox Manager application:
1. Browse for the uninstall program file or the shortcut/link that points to the
uninstall program file. The uninstall program shortcut is in the same folder as
the program shortcut (Start menu, program group, on, or user specified) that
is used to start the SANbox Manager application.
2. Double-click the uninstall program file or shortcut/link, and follow the
instructions to uninstall the SANbox Manager application.
2.5
Changing Default File Password
To change the password for the default fabric view file, do the following:
1. Open the File menu and select Change Default File Password to open the
Set New Password window as shown in
Figure 2-5 .
Figure 2-5 Set New Password Window
2. Enter the new password in the Default File Password field.
3. Re-enter the same password in the Re-enter Password to Confirm field.
4. Choose the OK button to save the changes.
Note: For UNIX uninstalls, execute the link to Uninstall_SANbox_Manager. If
no links were created during the installation, run: $INSTALL_DIR/
UninstallerData/Uninstall_SANbox_Manager. Where INSTALL_DIR is
the directory selected for installation.