Qlogic SANbox2 SANbox2-64, Руководство пользователя

Страница: 200 / 224

C – Messages
Port Properties Dialog
C-8 59048-01 A
C.5
Port Properties Dialog
Table C-5. Port Properties Dialog Messages
Message User Action
Invalid value entered for BB credits.
Or
Failed to set I/O stream guard change.
Or
Failed to set new TL mode.
Or
Failed to set new BB credits.
Or
Request to save and activate config failed.
Or
Received error in attempting to edit switch
configuration.
Or
Received error in attempting to save
switch configuration.
Or
Received error in attempting to activate
switch configuration. Verify that the data is valid, that the user
has permissions to modify the
configuration on the switch, that the switch
is reachable in the fabric, and that the
fabric is reachable from the user’s
workstation, then retry the configuration
change.
Received error in attempting to release
admin privileges The application did not receive a required
response from the switch. This may be
caused by a momentary or extended loss
of communications with the fabric.
First refresh the information in the display
to determine whether the changes took
effect. If not, retry the changes.
If the error persists, determine whether
communications with the switch have
stopped, and resolve any network
problems. When communication with the
fabric has resumed, return to the
application to view the properties for the
port and verify whether the changes took
effect. If not, then retry the changes.
Request to save and activate config failed. Verify that the data is valid, that the user
has permissions to modify the
configuration on the switch, that the switch
is reachable in the fabric, and that the
fabric is reachable from the user’s
workstation, then retry the configuration
change.