Qlogic SANbox2 SANbox2-64, Руководство пользователя

Страница: 132 / 224

A – Command Line Interface
Set Config Command
A-28 59048-01 A
ISLSecurity E_Port security. Determines which switches a
port will establish a link with.
■
Any - link with any FC-SW-2 compliant
switch.
■
Ours - link only with an FC-SW-2 compliant
QLogic switch.
■
None - reject the link.
SymbolicPortName Descriptive name
ALFairness Arbitration loop fairness. Enables (True) or
disables (False) the switch’s priority to arbitrate
on the loop.
ARB_FF Use ARB_FF instead of idles on loop FCAL
option
InteropCredit Interoperability credit. The number of buffer-to-
buffer credits per port. 0 means the default (12)
is unchanged.
ExtCredit Extended credits. The number of port buffer
credits that this port can acquire from donor
ports.
FANEnable Fabric address notification. Enables (True) or
disables (False) the communication of the
FL_Port address, port name, and node name to
the logged-in NL_Port.
LCFEnable Link control frame preference, R_CTL = 0xC
MFSEnable Multi-Frame Sequence bundling
MFS_TOV MFS limit for camp on
MSEnable Management Server enable on this port
NoClose Don't close unless another device arbitrates
I/O Stream Guard Enables or disables the suppression of RSCN
messages
VIEnable Enable VI preference routing
CheckAlps Close before sending frames to new target
Table A-7. Set Config Port Parameters (Continued)
Parameter Description