Qlogic QLogic Fibre Channel Switch Скачать руководство пользователя

Страница: 76 / 76

3 – Event Messages

Informative Events

3-64

59060-04 A

(I) (8F00.0009) Link Added

Meaning:

The application fabric discovery process has discovered a new
inter-switch link (ISL) in the fabric

(I) (8F00.000A) Link Removed

Meaning:

A link has been removed from the display. This is either because
the fabric discovery process has discovered that the link is no
longer in the fabric, or because the user has deleted the link
manually.

(I) (8F00.000B) Login Changed

Meaning:

The login to the fabric has changed. The description field will show
the reason for the change in the login.

(I) (8F00.000C) Fabric Status status

Meaning:

The severity of the fabric status has changed. The description field
will show the reason for fabric status.

(I) (8F00.000D) Switch Status status

Meaning:

The severity of the switch status has changed. The description field
will show the reason for the switch status.

(I) (8F00:000E) Link Status status

Meaning:

The severity of the link status has changed. The description field
will show the reason for link status.

Содержание QLogic Fibre Channel Switch













































































Результаты поиска

Содержание QLogic Fibre Channel Switch

Отзывы:

Похожие инструкции для QLogic Fibre Channel Switch

Бренды по названию

Популярные бренды

Qlogic QLogic Fibre Channel Switch, Руководство по сообщениям событий

Результаты поиска

Содержание QLogic Fibre Channel Switch

Отзывы:

Похожие инструкции для QLogic Fibre Channel Switch

Бренды по названию

Популярные бренды