![Qlogic QLogic Fibre Channel Switch Скачать руководство пользователя страница 22](http://html2.mh-extra.com/html/qlogic/qlogic-fibre-channel-switch/qlogic-fibre-channel-switch_event-message-manual_3221449022.webp)
3 – Event Messages
Alarm Events
3-10
59060-04 A
S
(A1003.0038) (Merge failed, Total zones in zonesets limit would be exceeded.)
Meaning:
A fabric merge failed because the total number of zones in zone
sets exceeds the zoning database limit.
Action:
Remove zones from the local switch or the remote switch so that
the combined sum is less than zones in zone sets limit.
(A1003.0039) (Merge failed, total zone limit would be exceeded.)
Meaning:
A fabric merge failed because the total number of zones exceeds
the zoning database limit.
Action:
Remove zones from the local switch or the remote switch so that
the combined sum is less than maximum zone limit.
(A1003.003A) (Zone Merge conflict for ZoneSet zone_set_name (Zone mismatch for zone=
zone_name, check type or members), ISOLATING)
Meaning:
A fabric merge failed because two zones of the same name in two
zone sets of the same name have different membership.
Action:
Reconcile the membership in the two zones so that they are the
same.
(A1003.003B) (Incomplete merge request sequence received, unable to process request.)
Meaning:
A remote switch sent a merge request that was not understood.
Action:
Check the remote switch for configuration errors or equipment
malfunction.
(A1003.003C) (Incompatible Zoning mode, Isolating link)
Meaning:
The fabric contains switches with a mix of interoperability mode
settings.
Action:
Configure all switches in the fabric to have the same value for
interoperability mode.
(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action
to be brought online.)
Meaning:
When deactivating a security set, ports that were previously
downed due to security violations remain down.
Action:
Reset the ports or place the ports online.
(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)
Meaning:
Attempt at activating fabric binding with an ISL group that has no
members is not allowed because there are inter-switch links (ISL)
logged in to the switch.
Action:
Configure all ISLs offline or add each ISL member with fabric
binding information to the ISL group before activating.