3 – Event Messages
Alarm Events
3-42
59060-04 A
S
(A3006.0001-0009) (value voltage sensor shows valueV - ALARM SET)
Meaning:
An out-of-range voltage condition has occurred on a SANbox 5000
switch.
Action:
Contact your authorized maintenance provider.
(A3006.0001-0009) (Blade fault (valueV_LOW - The valueV voltage supply is out of range, it
is too low)
Meaning:
A low voltage blade fault has occurred on a SANbox 9000 switch.
Action:
Contact your authorized maintenance provider.
(A3007.0001-0009) (value voltage sensor shows valueV - ALARM CLEAR)
Meaning:
Out-of-range voltage condition on a SANbox 5000 series switch
has cleared.
Action:
None.
(A3007.0001-0009) (Blade fault (blade_fault - CLEARED)
Meaning:
The high or low voltage SANbox 9000 blade fault has cleared.
Action:
None.
(A3008.0000) (The configuration area was damaged or a Remake Filesystem was
performed from PROM mode. You must perform a 'config restore' to clear
this error.)
Meaning:
The configuration area was damaged or a Remake Filesystem was
performed from Maintenance mode.
Action:
Enter the Config Restore command to clear the error. If this does
not correct the problem, contact your authorized maintenance
provider.
(A4000.0001) (threshold of value hit rising trigger trigger_number in value second window on
port port_number - ALARM SET
Meaning:
The switch exceeded the specified threshold rising trigger in the
specified sample window.
Action:
Investigate the specified port for problems or adjust the rising
trigger or sample window.
(A6000.0002) (Configured port speed for port port_number not compatible with media.)
Meaning:
The transceiver in the named port is not capable of transmitting at
the configured port speed.
Action:
Reconfigure the port speed or replace the transceiver.
