3 – Event Messages
Alarm Events
3-14
59060-04 A
S
(A1003.0069) (Failing remote zoning configuration, invalid zone data received)
Meaning:
Zoning activation failed because the switch has detected invalid
zoning data that is not supported in the local interop mode.
Action:
Check your zoning configuration and remove incompatible zone
members.
(A1004.0001) (Port in active hard zone, but not installed or present on this switch.)
Meaning:
A zone member in an ACL zone on this switch is defined with an
invalid port number.
Action:
Examine the fabric and correct the zone membership.
(A1004.0005) (No communication from neighbor switch on port port_number with domain
ID domain_ID, lost route)
Meaning:
This switch has not received a hello from the remote switch for 80
seconds. Routes learned through this link are discarded.
Action:
None.
(A1004.0008) (Eport Isolating due to ELP Incompatibility)
Meaning:
An E_Port isolated due to an ELP (Exchange Link Parameter)
incompatibility.
Action:
Review accompanying alarms for specific cause.
(A1004.0009) (Eport Isolating due to ESC Incompatibility)
Meaning:
An E_Port isolated because the connecting switch failed to support
the standard routing protocol FSPF.
Action:
Connect a compatible switch.
(A1004.000A) (Eport Isolating due to EFP Domain Overlap)
Meaning:
An E_Port isolated because each fabric has a switch with the same
domain ID.
Action:
Change the domain ID on one of the conflicting switches.
(A1004.000B) (Eport Isolating due to Switch Administratively Offline)
Meaning:
An E_Port isolated because the local switch has been placed
offline.
Action:
Configure the administrative state to Online to establish the link.
