3 – Event Messages
Warning Events
59060-04 A
3-57
A
(W) (8B00.000D) (SMTP servers in the CallHome setup are using duplicate IP address and
port number pairs)
Meaning:
The Call Home service configuration must not duplicate both the
Simple Mail Transfer Protocol (SMTP) server IP address and port
number values. However, the configuration may duplicate either
the server IP address or the port number. For better fault tolerance,
the SMTP servers should run on different physical systems. The
port number value of 25 is the well-known service number for the
SMTP protocol.
(W) (8B00.000E) (Message queue is empty, cancelling attempts to retry sending last
message)
Meaning:
The Call Home service was waiting to resend a message when a
the message expired or there was a request to clear the queue of
all messages.
(W) (8B00.000F) (Will retry sending via SMTP server ip_address, port port_number, after
seconds seconds)
Meaning:
After a communication failure or Simple Mail Transfer Protocol
(SMTP) protocol error, the switch attempts to resend the email
message using the specified server, port, and delay.
(W) (8B00.0010) (Will retry sending via SMTP server ip_address, port port_number)
Meaning:
After receiving a transient error from the Simple Mail Transfer
Protocol (SMTP) server on a email message sent to a recipient, the
Call Home service will attempt to resend the email message.
(W) (8B00.0011) (SMTP addresses are defaults or disabled, will not retry sending
messages until a valid SMTP address has been configured and enabled)
Meaning:
Both Simple Mail Transfer Protocol (SMTP) server IP addresses in
the Call Home service configuration are the default value (0.0.0.0)
or they have not been enabled.
(W) (8B00.0013) (Encountered failure communicating with SMTP server=ip_address,
port=port_number, Reason=reason, Description=description,
Response=response)
Meaning:
The Call Home Simple Mail Transfer Protocol (SMTP) client was
unable to establish communications with the specified SMTP
server. The Reason, Description, and Response fields describe the
error. If the error is a system call failure, the Desciption field
provides more detail. If the error was an SMTP server response
failure, the Response field provides more detail.
