3 – Event Messages
Alarm Events
3-30
59060-04 A
S
(A1005.0076) (Extraction latch is open)
Meaning:
A SANbox 9000 blade latch is open.
Action:
Examine the switch and close open latches.
(A1005.0077) (Extraction latch was closed)
Meaning:
The SANbox 9000 blade latch has been closed.
Action:
None.
(A1005.0078) (Extraction latch ignored until hotreset completes)
Meaning:
Extraction latch was opened while a switch hot reset was in
progress.
Action:
Return the extraction latch to the closed position. Wait until the hot
reset is complete, then remove the blade.
(A1005.0079) (Blade fault fault reported from primary CPU, resetting switch)
Meaning:
A blade fault has occurred on the SANbox 9000 primary CPU
blade and the switch is resetting.
Action:
Contact your authorized maintenance provider.
(A1005.007A) (Blade fault fault reported from primary CPU, powering off blades/ports)
Meaning:
A blade fault has occurred on the SANbox 9000 primary CPU
blade. I/O blades are being powered down.
Action:
Contact your authorized maintenance provider.
(A1005.007C) (Secondary CPU's latch is closed so now able to become Fault Tolerant)
Meaning:
The SANbox 9000 secondary CPU blade latch has been closed;
the switch is now fault tolerant.
Action:
None.
(A1005.007D) (Canceling callhome edit mode as a result of a CPU switchover)
Meaning:
A CPU blade switchover occurred while a CallHome Edit session
was open. The CallHome Edit session was canceled.
Action:
Reopen the CallHome Edit session.
(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN
share a soft zone)
Meaning:
The named zone members cannot communicate because they are
members of different ACL hard zones.
Action:
Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
